
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its 50mm nominal stroke can be dialed back by up to 30mm, creating a precise 20-50mm usable travel window for commissioning without adding external stops. This bore uses a G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread.
Equipped with a magnet for position sensing, this -S model works directly with AirTAC CMSE reed and DMSE solid-state switches housed in the dual-side sensor grooves. It features a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB and pivot styles found on other variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end position from 20 to 50mm during product size changes without physically replacing the cylinder.
The integrated magnet pairs with DMSE solid-state sensors to confirm the adjusted end-of-stroke position reliably.
The adjustable stroke is ideal for product changeovers where the end position shifts, saving the cost of swapping a fixed-stroke SAI cylinder. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, select a SAIL or BSAI cylinder. As a dimensionally interchangeable ISO 15552 cylinder, match the 32mm bore, 50mm stroke, 30mm adjustment, PT port, and -S magnet for direct replacements.
Quick checklist
The rear adjuster screw lets you shorten the 50mm stroke by up to 30mm, providing a usable travel window of 20-50mm. It functions as a mechanical stop and does not lock the load without air pressure.
At 0.7 MPa the push force increases to 563N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.