
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X50-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the nominal 50 mm travel by up to 40 mm, creating a highly precise 10-50 mm usable window. The integrated -S magnet enables direct mounting of CMSE reed and DMSE solid-state sensors along the dual-sided extruded aluminum barrel grooves.
Unlike a fixed-stroke SAI unit, this adjustable model allows technicians to fine-tune the retract end-position during commissioning or product changeovers without swapping the cylinder or adding external stops. The rear adjuster functions purely as a mechanical travel stop and works in tandem with the variable air cushions at both ends to decelerate the load, but it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10-50 mm travel needed when adapting automated lines for different product sizes without changing the cylinder.
Fine-tune the retract stop during initial commissioning to achieve precise positioning without adding external mechanical stops.
Use the rear adjustment screw to vary the stroke dynamically for prototype testing and validation equipment.
The 12 mm carbon steel rod and M10x1.25 thread handle basic loads, but because the effective stroke is short, side-loading is minimal compared to longer strokes. Mounting options include the reduced SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the 50 mm nominal stroke by up to 40 mm, resulting in a usable 10-50 mm travel window for exact end-position tuning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.