verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X50-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke50 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$58.84 $66.34Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50

The AirTAC SAIJ32X50-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 50mm stroke that can be dialed back by up to 50mm, yielding a highly versatile 0-50mm usable travel window for exact end-position tuning.

This model uses a carbon steel piston rod with an M10x1.25 thread and a PT G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches later. Adjustment is achieved via an external stopper screw at the retract end, which sets the travel limit without requiring a cylinder swap.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X50-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke50 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50 Is Used

tune

Product Changeovers

Dial in the exact 0-50mm end-stop during format changes on packaging lines without swapping hardware.

precision_manufacturing

End-Position Tuning

Fine-tune the retract distance during machine commissioning to perfectly time pick-and-place movements.

settings_input_component

Variable Stops

Create adjustable mechanical limits for delicate testing fixtures where the stroke length varies between runs.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50 the Right Cylinder?

If your application requires greater force, stepping up to the 40mm bore increases push force to 628N. The adjustable stroke is ideal for machine setups requiring frequent product changeovers, eliminating the need to physically swap cylinders for different end positions.

Because the rear adjuster acts solely as a travel stop and not a locking device, this cylinder cannot hold a load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder. When replacing an ISO 15552 unit, match the 50mm stroke, 50mm adjustment range, PT G1/8 port, and your desired mounting style from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50 FAQ

It features a rear stopper screw that allows you to trim the effective stroke by up to 50mm. This creates a 0-50mm usable travel window, letting you set the exact end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X50-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X50-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.