
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 490-500 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping hardware.
This 32 mm bore unit utilizes a PT tapered port thread and a 12 mm carbon steel rod. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. While the variable air cushions at both ends handle end-of-stroke deceleration, the rear adjuster acts strictly as a mechanical stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 490-500 mm retraction point during machine setup to perfectly align delicate parts without machining custom spacers.
Quickly adjust the stroke by up to 10 mm on a packaging line when switching to a slightly different carton size, minimizing downtime.
Use the 500 mm travel to push components over a distance, relying on the fine adjustment to seat parts gently without impact shock.
Choose this adjustable model over a fixed-stroke SAI when your assembly requires precise end-position tuning to accommodate minor mechanical variations or product changeovers. Because this cylinder features a 500 mm stroke, the 12 mm rod requires external guiding to prevent excessive side-loading and premature seal wear.
To match this ISO 15552 dimensionally interchangeable cylinder, specify a 32 mm bore, 500 mm stroke, 10 mm adjustment range, PT port thread, and standard carbon steel rod. It supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. For load-holding without continuous air pressure, consider an external rod lock or the AirTAC SAIL series instead of relying on the adjuster.
Quick checklist
The rear adjuster screw lets you shorten the nominal 500 mm stroke by up to 10 mm, creating a 490-500 mm travel window. It acts as a mechanical stop to set the exact end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.