
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 500 mm stroke that can be fine-tuned backward by up to 100 mm, yielding a usable travel window of 400 to 500 mm. This allows you to dial in the exact retract end-position during commissioning without swapping hardware.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch placement. Because no magnet is specified, position sensing would require adding the -S option to support AirTAC CMSE reed or DMSE electronic sensors. The carbon steel piston rod uses an M10x1.25 thread, and the standard PT tapered port is G1/8. It relies on adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract distance by up to 100 mm when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Fine-tune the 400 to 500 mm travel window during commissioning to perfect the seating force against a mechanical stop without adding external spacers.
Adjust the stroke length on a sorting pusher to accommodate different box widths on the fly, ensuring accurate diverting without reprogramming.
Choose this 32 mm bore adjustable cylinder when you need precise retract positioning rather than the fixed travel of a standard SAI model. If your application requires higher thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. Conversely, if your force requirements are minimal, this bore provides a compact footprint. The rear adjuster acts strictly as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider an external pilot-operated check valve or the SAIL locking cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 500 mm nominal stroke, 100 mm adjustment range, PT G1/8 port, and carbon steel rod. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 500 mm stroke is lengthy for a 32 mm rod, an external guide is highly recommended to prevent excessive side-loading and rod binding.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
A rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 500 mm nominal length down to 400 mm. This stop only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.