
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 500mm nominal stroke that can be fine-tuned backward by up to 100mm, creating a precise 400-500mm usable travel window for product changeovers. It delivers 402 Newtons of push force at 0.5 MPa and uses a PT tapered port thread.
This SAIJ variant includes a magnet for position sensing, supporting AirTAC CMSE reed and DMSE electronic switches via the dual-side sensor grooves on its extruded aluminum barrel. The carbon steel piston rod has an M10x1.25 thread, and while it handles standard loads well, an external guide is recommended for this long 500mm stroke to prevent excessive rod side-loading.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 400-500mm travel window during product size transitions without swapping out the entire cylinder assembly.
Fine-tune the retract stopper at commissioning to perfect the resting position of your tooling within a 100mm range.
Adjust the end-stop on the fly for packaging lines that process multiple box lengths using the same actuator.
If your setup needs higher force, stepping up to the 40mm bore yields 628N. The SAIJ32X500-100-S is selected over a fixed SAI cylinder when you need to dial in the exact retract position at commissioning without adding external stops. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Because the stroke is 500mm, ensure proper external guiding to protect the rod from deflection. Remember that the rear adjuster acts only as a travel stop to set deceleration, not as a lock; it will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Quick checklist
At 0.5 MPa operating pressure, this 32mm bore cylinder provides 402 Newtons of push force and 345 Newtons of pull force. It can reach up to 724 Newtons of push force at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm. This turns the 500mm nominal stroke into a 400-500mm adjustable travel window, letting you set the exact end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.