verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke500 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S

The AirTAC SAIJ32X500-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a 490 to 500 mm usable travel window for precise retract-end tuning. It features a carbon steel piston rod and a PT tapered port. Because it includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors for exact position feedback.

The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. For applications requiring true load-holding without continuous air, consider the SAIL or BSAI series instead.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke500 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S Is Used

settings_input_component

Machine Changeover

Dial in the 490-500 mm retract position during product size changes without physically replacing the cylinder or adding external stop blocks.

precision_manufacturing

End-Position Tuning

Fine-tune the exact end-of-stroke location during commissioning to compensate for mechanical tolerance stack-up in long-travel assemblies.

conveyor_belt

Variable End Stops

Adjust the retract distance on the fly for automated lines that process varying package lengths within the 10 mm trim window.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S the Right Cylinder?

If your setup requires less force, step down is not an option here, but stepping up to a 40 mm bore yields 628 N. The rear screw allows up to 10 mm of fine-tuning at commissioning, whereas a fixed-stroke SAI cylinder locks you into a single exact dimension.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 500 mm stroke, 10 mm adjustment, PT port thread, and the -S magnet requirement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 500 mm, the 12 mm rod is highly susceptible to side-loading; always use an external guide to prevent premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S FAQ

At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.

The rear adjuster screw lets you shorten the 500 mm nominal stroke by up to 10 mm, creating a 490-500 mm travel window. It functions as a mechanical stop to fine-tune the end position and is not a locking device.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X500-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.