
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-20 is a double-acting ISO 15552 profile cylinder featuring a rear adjusting screw that allows you to fine-tune the end position. With a nominal 500 mm stroke and a 20 mm adjustment range, it provides a usable travel window of 480-500 mm, letting you dial in the exact retract distance at commissioning without adding external stops.
This 32 mm bore model includes a 12 mm carbon steel rod with an M10x1.25 thread, and variable air cushions at both ends to decelerate the payload. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure. For position holding, consider the SAIL or BSAI series. It supports mounting options Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 480-500 mm retract position during product size changes without physically swapping the cylinder or repositioning hard stops.
Fine-tune the end-of-stroke position during initial setup to compensate for mechanical tolerance buildup across long 500 mm travels.
Adjust the effective stroke by up to 20 mm on the fly for automated assembly lines requiring multiple indexed retract positions.
Choose this 32 mm bore adjustable cylinder when your application requires precise end-position tuning during machine setup or product changeover, avoiding the need to swap a fixed-stroke SAI cylinder. Because this model has a 500 mm stroke, the 12 mm rod requires an external guide to prevent excessive side-loading and premature seal wear.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 500 mm stroke, 20 mm adjustment, PT tapered port thread, and standard carbon steel rod. This non-magnet version omits the -S suffix; add -S if you need to use CMSE reed or DMSE electronic sensors in the dual-side barrel grooves.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from 500 mm down to 480 mm, creating a 480-500 mm usable window. The adjuster functions as a mechanical stop to set the position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.