
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the exact retract end-position at commissioning without swapping out the cylinder or adding external stops.
This model includes a magnet for CMSE or DMSE sensors and uses a PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides. Because the stroke extends to 500mm on a 32mm bore, the 12mm carbon steel rod and M10x1.25 thread will need external guidance to prevent excessive side-loading on the piston.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 480-500mm retract end-stop during product size changeovers on a packaging line without replacing the cylinder.
Ideal for diverter gates on conveyors where the exact firing position needs micro-adjustments to handle different package widths.
Dial in the precise end-of-stroke position during initial machine commissioning to prevent mechanical crashes.
If your application requires less force, step down is not an option below 32mm in this series, but if you need significantly more thrust, the 40mm bore provides 628N. The adjustable stroke is ideal for machine setups that undergo product changeovers, replacing the need for a fixed-stroke SAI cylinder when exact end-stop positions vary.
For ISO 15552 interchangeability, match the 32mm bore, 500mm stroke, PT port thread, and the -S magnet option. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-air load holding, consider the SAIL or BSAI series. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 500mm nominal stroke by up to 20mm. This creates a 480-500mm usable travel window for fine-tuning the end position, but it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.