
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. With a nominal 500 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 470-500 mm, letting you dial in the exact retract distance without adding external stops.
This model features a PT tapered port (G1/8) and variable air cushions at both ends to decelerate the piston. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic sensors if a magnet is added later. It supports a subset of ISO 15552 mountings—Basic, FA, LB, TC, FTC, TCM1, and TCM2—omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 470-500 mm travel window during initial commissioning to perfectly align end-effectors without machining new spacer blocks.
Quickly adjust the retract stop on packaging lines when switching between different product lengths, minimizing downtime.
If your process demands less force, stepping down is not an option in the SAIJ line, but if you need significantly more thrust, a 40 mm bore provides 628 N. The adjustable rear stopper acts solely as a travel limit and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
Because this cylinder has a 500 mm stroke, the 12 mm rod and M10x1.25 thread will experience amplified side loads if the load is unsupported. You should use an external guide rail to prevent rod binding over this long travel distance. To replace an ISO 15552 cylinder, match the 32 mm bore, 500 mm stroke, 30 mm adjustment, PT port, and your required mounting bracket.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from 500 mm down to 470 mm. This creates a 470-500 mm travel window for fine-tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.