
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 500 mm nominal stroke that can be fine-tuned down by up to 30 mm, creating a precise 470-500 mm usable travel window.
This variant includes a standard magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting. The rear stopper allows you to dial in the retract end-position during commissioning without adding external stops, though it acts only as a travel limit and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 470-500 mm retract position during product size changes without swapping out the entire cylinder or re-engineering fixed stop blocks.
Use the rear adjuster to precisely set the retract end position during machine commissioning, absorbing minor mechanical alignment variations.
If your application requires less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable stroke is ideal for product changeovers, whereas a fixed SAI cylinder is better for rigid, unchanging end stops. For load-holding without live air, consider the SAIL or BSAI series.
Because this model features a 500 mm stroke, the 12 mm carbon steel rod and M10x1.25 thread will experience amplified side loads if the load is unsupported. An external guide is highly recommended to prevent rod binding. This configuration uses PT tapered ports, carbon steel rod material, and includes the -S magnet for CMSE/DMSE sensors. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as a mechanical stop that lets you shorten the 500 mm nominal stroke by up to 30 mm, yielding a 470-500 mm travel window. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.