
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 500 mm travel by up to 40 mm. This creates a precise 460-500 mm usable window for fine-tuning the retract end position during commissioning without adding external stops.
Because the 500 mm stroke is unsupported, the 12 mm rod diameter requires an external guide to handle side loads. This unit includes a magnet for CMSE reed and DMSE electronic sensors, and its extruded aluminum barrel integrates sensor grooves on both sides. The mounting set is restricted to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within a 460-500 mm window during machine setup, eliminating the need to machine custom spacers for different product sizes.
Quickly adapt the stroke length on packaging lines when handling varying package dimensions, ensuring precise handoff without replacing the cylinder.
Use the 40 mm adjustment range to compensate for mechanical wear or slight misalignments in long-stroke assemblies without external stopper blocks.
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires product-size changeovers or precise end-position tuning without swapping hardware. For ISO 15552 replacement, match the 32 mm bore, 500 mm stroke, 40 mm adjustment, PT tapered port threads, and the -S magnet.
Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the nominal 500 mm down to 460 mm. This stopper fine-tunes the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.