
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel within a 450 to 500 mm window. Equipped with a -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The extruded aluminum barrel provides standard ISO 15552 mounting dimensions without relying on tie-rods.
The built-in rear stopper enables on-the-fly position trimming during commissioning, functioning strictly as a travel stop rather than a load-holding lock. For applications requiring position retention without live air pressure, an external rod lock or the AirTAC SAIL lock variant is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 450-500 mm stroke window during format changes on packaging lines, using the rear screw to set exact end positions without machining new stopper blocks.
Provides adjustable reach for pneumatic pushers on conveyors, allowing operators to fine-tune the extended stop distance based on varying package sizes.
Enables precise mechanical calibration during equipment commissioning, ensuring the 32 mm bore actuator hits its target mark perfectly before locking down the setup.
Choose this adjustable-stroke model when a fixed SAI cylinder cannot accommodate product changeovers or minor mechanical variations, as the 50 mm rear adjustment screw allows rapid end-position tuning without swapping hardware. To replace an ISO 15552 cylinder, match the 32 mm bore, 500 mm stroke, 50 mm adjustment range, G1/8 PT port, and standard mounting options.
Because this cylinder features a 500 mm stroke, the extended 12 mm rod is susceptible to side-loading forces. Always utilize an external guide rail to support the load and prevent premature seal wear. Remember that the rear adjuster and air cushions only decelerate the load; they cannot hold a suspended load without continuous air pressure.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop, allowing you to shorten the nominal 500 mm stroke by up to 50 mm, creating a usable travel window of 450 to 500 mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.