
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X500-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X500-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 425-500mm usable travel window, letting you dial back the nominal 500mm stroke by up to 75mm during commissioning without adding external stops.
This 32mm bore unit uses PT tapered ports and variable air cushions at both ends to manage end-of-travel deceleration. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed and DMSE electronic switches, though this specific SKU ships without a magnet. The rear adjuster acts strictly as a travel stop for fine-tuning, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X500-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 425-500mm window during machine setup without swapping cylinders or bolting on external physical stops.
Quickly adapt the stroke length on packaging lines when handling different product sizes, using the 75mm adjustment range to fine-tune the retracted position.
Trim the effective travel back from 500mm during initial commissioning to prevent mechanical interference and safely dial in the final end-of-stroke point.
Choose this adjustable-stroke model over a fixed SAI when you need precise end-position tuning for product changeovers. To match this ISO 15552 replacement exactly, verify the 32mm bore, 500mm stroke, 75mm adjustment, PT port thread, and standard carbon steel rod.
Because the 500mm stroke is long relative to the 32mm bore, the 12mm rod will not support high side loads without an external guide. The rear adjuster and air cushions only decelerate the travel end; for true load-holding without live air pressure, select a SAIL or BSAI cylinder instead.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear external stopper screw lets you mechanically shorten the effective stroke by up to 75mm, creating a 425-500mm usable travel window. The adjuster acts as a travel stop for end-position tuning and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.