
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 55 mm stroke that can be fine-tuned down by up to 20 mm, creating a usable travel window of 35 to 55 mm. This allows you to dial in the exact retract position at commissioning without adding external stops.
This model features a carbon steel piston rod with an M10x1.25 thread, and uses PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position feedback. It uses variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract distance by up to 20 mm when switching between product sizes on a packaging line, avoiding mechanical rebuilds.
Fine-tune the final resting position of a small pick-and-place gripper within the 35-55 mm travel window during initial commissioning.
Use the rear stopper screw to set precise ejection lengths for lightweight components without installing external hard stops.
The adjustable stroke is perfect for machine setups requiring variable end-stops or product changeovers, saving the cost of swapping a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure—if load-holding is required without continuous air, consider the SAIL or BSAI series.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 32 mm bore, 55 mm nominal stroke, 20 mm adjustment range, PT port thread, and the -S magnet option. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm. This creates an adjustable travel window from 35 to 55 mm, letting you set the exact end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.