
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 55 mm stroke that can be dialed back by up to 30 mm, creating a precise 25-55 mm usable travel window for exact end-position tuning at commissioning.
This adjustable model features a carbon steel piston rod with an M10x1.25 thread and uses a PT tapered port. It retains the standard extruded aluminum barrel with sensor grooves on both sides, but utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear screw acts purely as a travel stop to decelerate the piston, meaning it will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 25-55 mm window during machine commissioning to perfect part seating without adding external stopper blocks.
Quickly adjust the stroke by up to 30 mm on the rear screw to accommodate slight variations in incoming product sizes on a packaging line.
The adjustable 25-55 mm travel window allows you to fine-tune the retract position without swapping the cylinder or bolting on external stops, unlike a fixed-stroke SAI model.
For an exact ISO 15552 replacement, match the 32 mm bore, 55 mm stroke, 30 mm adjustment code, PT port thread, and your required mounting hardware. Because this unit lacks a magnet (-S), it cannot host CMSE or DMSE sensors without a configuration change. If the machine requires true load-holding without live air, an external rod lock or a SAIL pneumatic lock cylinder is necessary, as the rear adjuster is not a brake.
Quick checklist
The rear adjuster screw allows you to shorten the 55 mm nominal stroke by up to 30 mm, providing an effective travel range of 25 to 55 mm. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.