
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X55-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal 55 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 25 to 55 mm. This allows you to fine-tune the retract end-position at commissioning without adding external stops.
Equipped with a magnet for position sensing, this model works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side barrel grooves. The extruded aluminum profile omits tie-rods for a compact footprint, and the PT G1/8 port matches the 12 mm carbon steel rod. Note that the rear adjuster acts only as a travel stop; it does not hold loads without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 25-55 mm travel window during product size transitions to set new retract end-stops without swapping the cylinder or adding external spacers.
Fine-tune the exact retract position during machine commissioning to absorb mechanical tolerances and achieve precise part placement.
Leverage the -S magnet with CMSE or DMSE switches to confirm the adjusted end-of-stroke position for automated control feedback.
If your changeover requires less force, stepping down is an option, but if you need significantly more thrust, a 40 mm bore provides 628 N at 0.5 MPa. The adjustable stroke is ideal for product-size changeovers on a line, replacing fixed-stroke SAI cylinders when exact positioning is uncertain.
For ISO 15552 replacement matching, verify the 55 mm nominal stroke, 30 mm adjustment, PT G1/8 port, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the rear adjuster is a stop and not a lock, use a SAIL or BSAI cylinder if you need fail-safe load holding without live air pressure.
Quick checklist
The rear adjusting screw allows you to shorten the effective stroke by up to 30 mm. This gives the 55 mm nominal stroke a usable travel window of 25 to 55 mm, letting you set the exact retract end-position during commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.