verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X55-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 55mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke55 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$60.91 $68.41Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50

The AirTAC SAIJ32X55-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 5 to 55 mm, allowing you to dial back the nominal 55 mm stroke by up to 50 mm during commissioning.

This model uses a PT tapered G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. Because the rear adjuster acts purely as a mechanical stop to set the retract end position, it does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X55-50
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50 Is Used

settings_input_component

Machine Setup Tuning

Dial in the exact 5 to 55 mm retract distance during initial commissioning without swapping out the entire cylinder or adding external stopper blocks.

conveyor_belt

Product Changeover

Quickly adjust the end-stop position on a conveyor handling different package sizes, utilizing the 50 mm adjustment range to adapt the travel window.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50 the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when you need finer end-position control than a fixed-stroke SAI provides, without adding external stops. Conversely, if you need less force in a smaller footprint, confirm if a smaller bore meets your load requirements.

The rear adjuster screw lets you fine-tune the travel window on the fly, which is ideal for product changeovers on a packaging line. Remember that the adjuster and the variable air cushions at both ends only decelerate the piston; they do not lock the load. For true position holding without live air, consider using an external pilot-operated check valve or exploring the SAIL or BSAI series. This SAIJ model accepts the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50 FAQ

The nominal stroke is 55 mm, but the rear adjuster allows you to shorten the effective travel by up to 50 mm. This creates an adjustable usable travel window of 5 to 55 mm, depending on your setup.

At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X55-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X55-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.