verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke550 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$105.58 $113.08Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10

The AirTAC SAIJ32X550-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the retract end-position by up to 10 mm. This yields a usable travel window of 540 to 550 mm, letting you dial in the exact return point during commissioning without adding external stops.

Unlike a fixed-stroke SAI cylinder, this model integrates an adjustment screw directly at the rear cap to act as a physical stop for end-position tuning. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE solid-state switches if needed later. It supports a speed range of 30 to 800 mm/s and uses G1/8 PT tapered ports.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X550-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke550 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×550Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10 Is Used

precision_manufacturing

Machine Changeover

Fine-tune the 540-550 mm retract position to adapt automated equipment to new product lengths without physically swapping cylinders.

settings_input_component

End-Stop Calibration

Use the 10 mm rear adjustment screw to precisely set the return stroke limit, absorbing mechanical tolerances during initial machine setup.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10 the Right Cylinder?

The 10 mm adjustment range is ideal for fine-tuning machinery changeovers where a fixed 550 mm stroke might leave a few millimeters of mechanical slack. For strokes of 550 mm, the 12 mm rod is susceptible to side-loading, so an external guide rail should be used to prevent premature seal wear.

When replacing an ISO 15552 cylinder, match the 32 mm bore, 550 mm stroke, 10 mm adjustment, G1/8 PT port, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. Note that the rear adjuster is a travel stop, not a lock; it will not hold the load without live air pressure, so consider an AirTAC SAIL or BSAI cylinder for fail-safe load holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10 FAQ

At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.

The rear adjuster screw acts as a mechanical stop that lets you shorten the 550 mm nominal stroke by up to 10 mm, creating a 540-550 mm usable travel window. It only sets the end position and does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X550-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.