
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 540-550 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without swapping the unit. The integrated -S magnet enables position detection with AirTAC CMSE reed or DMSE electronic sensors.
The extruded aluminum barrel includes sensor grooves on both sides, and the standard carbon steel rod mates via an M10x1.25 thread. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 540-550 mm travel limit during machine setup to perfect the final resting position of a moving fixture.
Quickly adjust the stroke by up to 10 mm on a packaging line when switching to a slightly different product size.
Leverage the -S magnet with DMSE electronic sensors to confirm the adjusted end-of-travel position in automated assemblies.
Choose this 32 mm bore when an application requires precise end-position tuning within a 540-550 mm window, rather than installing a fixed-stroke SAI cylinder and adding external stops. Because the stroke is 550 mm, the 12 mm rod and M10x1.25 thread have limited side-load capacity; always guide the load externally to prevent rod binding.
For a direct ISO 15552 replacement match, specify a 32 mm bore, 550 mm stroke, 10 mm adjustment, PT tapered port threads, and the -S magnet option. The SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. If the machine requires true load-holding without continuous air pressure, use an external rod lock or select an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 550 mm nominal stroke by up to 10 mm, creating a 540-550 mm usable travel window. It only sets the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.