
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 550 mm travel by up to 20 mm for a precise 530-550 mm usable window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Because the adjuster acts purely as a mechanical stop on the retract end, it sets the final position without acting as a lock, meaning live air is required to maintain the load. This cylinder omits FB, CA, CB, and CR mounts, utilizing a focused set of ISO 15552 attachments (Basic, FA, LB, TC, FTC, TCM1, TCM2) to simplify machine integration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 530-550 mm retract stop precisely during product size changeovers on a packaging line without adding external shims.
Fine-tune the final resting position of a tooling head during machine commissioning to achieve exact placement tolerances.
Act as an adjustable end-stop for lightweight items moving along a conveyor, allowing the effective stroke to be shortened on the fly.
The adjustable stroke is ideal for fine-tuning end positions during commissioning or product changeovers without swapping the cylinder, unlike a fixed-stroke SAI. When specifying a replacement, ensure you match the 550 mm stroke, 20 mm adjustment, PT port thread, and the required mounting bracket.
At 550 mm of travel, the 12 mm carbon steel rod is highly susceptible to side-loading forces. To prevent premature seal wear and binding, an external guide rail must support the load, as the cylinder itself cannot act as a structural bearing. For applications requiring the load to be held without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the 550 mm nominal stroke down to as little as 530 mm. It functions as a mechanical stop to set the end position and is not a lock, so continuous air pressure is needed to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.