verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke550 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$108.37 $115.87Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S

The AirTAC SAIJ32X550-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet operates directly with AirTAC CMSE reed and DMSE electronic switches.

This model uses a PT tapered G1/8 port and a 12mm carbon steel rod with an M10x1.25 thread. Because the 550mm stroke is relatively long for a 32mm bore, the rear adjuster helps fine-tune the end position, but the rod diameter still requires an external guide to prevent excessive side-loading. The rear stopper and adjustable air cushions manage deceleration, but neither will hold a load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke550 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×550Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S Is Used

tune

Product Changeover

Dial in the exact 520 to 550mm end-stop position on packaging lines when switching to a different carton size, avoiding physical cylinder swaps.

settings_input_component

Machine Setup

Fine-tune the retract position during initial commissioning to perfectly align a 32mm bore actuator's tooling without stacking external shims.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S the Right Cylinder?

Choose this 32mm bore adjustable cylinder when you need precise end-position tuning for product changeovers, stepping up from smaller bores if you need more force, or down to a 40mm bore (628N at 0.5MPa) if your payload is lighter. The SAIJ32X550-30-S is selected over a fixed-stroke SAI when a machine setup requires a variable end-stop rather than a rigid travel limit. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead. Given the 550mm stroke, an external guide is highly recommended to support the load and mitigate side-load stress.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S FAQ

The rear adjuster acts as a stopper that lets you shorten the effective travel from the 550mm nominal stroke down to 520mm. It only sets the travel end and decelerates the load; it does not lock or hold the position without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X550-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.