verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke550 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$105.58 $113.08Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40

The AirTAC SAIJ32X550-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 510-550mm usable travel window, allowing you to dial back the 550mm nominal stroke by up to 40mm during commissioning.

This model features a 12mm carbon steel rod with an M10x1.25 thread, sized to handle moderate side loads, though the 550mm length still necessitates an external guide for stability. It uses a PT tapered port thread and includes variable air cushions at both ends to manage deceleration. The extruded aluminum barrel integrates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X550-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke550 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×550Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40 Is Used

tune

Machine Setup & Changeover

Fine-tune the 510-550mm travel window during line changeovers without replacing the cylinder or adding external mechanical stops.

conveyor_belt

Variable End-Stop Positioning

Adjust the retract position on the fly to handle slight variations in incoming product size on a packaging conveyor.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40 the Right Cylinder?

The 40mm adjustment range is perfect for variable end-stops or product changeovers, avoiding the need to physically swap cylinders or bolt on external stops compared to a fixed SAI model.

When replacing an ISO 15552 cylinder, match the 32mm bore, 550mm stroke, 40mm adjustment, PT port thread, and mounting interface (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 550mm stroke exceeds 300mm, an external guide rail is required to prevent rod binding. Note that the rear adjuster is a travel stop, not a lock; for load-holding without live air, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40 FAQ

A rear external screw acts as a stopper, allowing you to shorten the effective stroke by up to 40mm. This creates a 510-550mm adjustable travel window, letting you fine-tune the end position at commissioning without swapping the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X550-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.