
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the effective travel by up to 40 mm. This creates a usable 510-550 mm stroke window, allowing you to dial in the exact retract position during commissioning without swapping out the cylinder or adding external stops.
Because the 550 mm stroke is relatively long for a 32 mm bore, the 12 mm carbon steel rod and M10x1.25 thread provide a robust interface, but an external guide is still recommended to prevent side-loading damage. The extruded aluminum barrel includes sensor grooves on both sides, and the -S magnet enables precise end-of-travel detection using AirTAC CMSE reed or DMSE electronic sensors. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position by up to 40 mm during product size transitions without replacing the cylinder or adding external mechanical stops.
Fine-tune the 510-550 mm travel window at commissioning to perfect timing and avoid hard mechanical crashes at the end of the stroke.
Adjust the actuation length on the fly for conveyor sorting gates that handle packages of varying dimensions.
Choose this 32 mm bore adjustable cylinder when your machine setup requires variable end positions or frequent product changeovers that a fixed-stroke SAI cannot accommodate. Conversely, lighter duties can drop to the 25 mm class.
When matching this for an ISO 15552 replacement, verify the 550 mm nominal stroke, the 40 mm adjustment range, PT tapered port (G1/8), and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. For any stroke of 300 mm or more, always support the load with an external guide rail to absorb lateral forces. If you need true load-holding without continuous air pressure, the rear stopper is insufficient; use a SAIL pneumatic lock, a BSAI clamp-lock, or an external rod lock.
Quick checklist
The rear adjuster screw acts as an external stopper that shortens the nominal 550 mm stroke by up to 40 mm, giving you an effective 510-550 mm travel window. It sets the end position but does not lock or hold the load without live air pressure.
The operational speed range is 30-800 mm/s, and it features variable air cushions at both ends to decelerate the piston.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.