
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 550 mm nominal stroke that can be fine-tuned down by up to 75 mm, yielding a usable travel window of 475 to 550 mm.
This extruded aluminum profile cylinder features variable air cushions at both ends to manage kinetic energy. The rear adjusting screw acts purely as a mechanical stop to set the retraction end position without needing external stops. For load-holding without live air pressure, a plain SAIJ cannot lock, so an external rod lock or a related SAIL pneumatic lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 475-550 mm retraction end-stop during product size changes without physically replacing the cylinder or adding external shims.
Ideal for diverter gates on conveyors where the full 550 mm stroke is occasionally too far, letting operators trim back up to 75 mm for different package sizes.
Resolve mechanical interference at startup by backing out the rear adjuster screw to find the perfect operational stroke within the 475-550 mm range.
If your application requires less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable stroke is ideal for product changeovers, allowing you to dial in the 475-550 mm window without swapping cylinders. Because the 550 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to prevent excessive side-loading on the 12 mm rod.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 550 mm nominal stroke, 75 mm adjustment range, PT port thread, and standard carbon steel rod. It supports the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Since no magnet is specified, position sensing via CMSE or DMSE switches is not enabled out of the box.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 550 mm nominal length down to 475 mm. It sets the travel end but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.