
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X550-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 550mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X550-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables position sensing with AirTAC CMSE reed and DMSE electronic switches.
With a nominal 550mm stroke and a 75mm adjustment range, this model provides a usable travel window of 475-550mm. This allows you to fine-tune the retract end position at commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X550-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 475 to 550mm during format size changes on a packaging line without swapping hardware.
Fine-tune the end-of-stroke position during initial commissioning to perfect the timing of a 32mm bore actuation sequence.
Use the 75mm rear adjustment screw to alter the effective stroke for delicate pick-and-place tasks requiring precise endpoint control.
Choose this 32mm bore when an application requires precise end-position tuning over a 475-550mm travel window. If you need greater thrust, stepping up to the 40mm bore yields 628N at 0.5 MPa. Select this adjustable SAIJ over a fixed SAI when machine setups require variable product-size changeovers. The PT port thread and carbon steel rod are standard here.
Because the 550mm stroke is relatively long for a 32mm bore, an external guide is recommended to prevent excessive side-loading on the rod. Note that the rear adjuster acts only as a travel stop, not a lock; the cylinder will not hold a load without live air. For load-holding requirements, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 550mm down to 475mm, giving a 475-550mm usable window. It functions as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.