
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X60-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 60 mm stroke with a 10 mm adjustment range, yielding a usable travel window of 50 to 60 mm.
This model uses a 12 mm carbon steel rod with an M10x1.25 thread, providing a robust interface for small-scale actuation. The rear adjuster acts purely as a travel stop for end-position tuning and does not lock the load without live air pressure. It supports AirTAC CMSE reed and DMSE electronic sensors, and its PT G1/8 port ensures efficient pneumatic flow for speeds up to 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 50 to 60 mm travel window during machine commissioning to perfect end-of-stroke positioning without external stops.
Quickly adapt the cylinder's effective stroke on the line to handle minor size variations between similar product runs.
Fine-tune the retract end-stop during initial assembly to synchronize multiple actuators within a compact fixture.
Select this 32 mm bore when an application requires precise end-stop calibration during commissioning without swapping cylinders or adding external stops. Conversely, this adjustable unit is preferred over a fixed SAI cylinder when accommodating minor product size variations on a line.
For exact ISO 15552 interchangeability, match the 32 mm bore, 60 mm stroke, 10 mm adjustment, PT G1/8 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear adjuster and air cushions decelerate the travel end but do not function as a brake; for load-holding without live air, consider an SAIL or BSAI cylinder.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 10 mm, providing a usable travel window of 50 to 60 mm. This stopper sets the travel end but does not hold the load without live air pressure.
At the maximum pressure of 1.0 MPa, it can generate up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.