verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke60 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$63.70 $71.20Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S

The AirTAC SAIJ32X60-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 40-60 mm usable travel window from the 60 mm nominal stroke. Equipped with a -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side barrel grooves.

This adjustable model omits the FB, CA, CB, and CR mounts, offering a focused setup set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear stopper mechanism allows precise end-position tuning during commissioning without adding external stops. Remember that the adjuster acts only as a travel stop and does not function as a load-holding brake.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke60 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S Is Used

precision_manufacturing

Machine Changeover

Dial in the 40-60 mm travel window during product size transitions to set exact retract distances without swapping hardware.

tune

Commissioning Calibration

Fine-tune the end position during initial machine setup using the rear stopper, avoiding the need for external shims.

settings_input_component

Sensor Tracking

Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end position in automated workflows.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S the Right Cylinder?

Choose this 32 mm bore when you need precise variable end-stops for product changeovers, stepping down from a 40 mm bore (528 N pull at 0.5 MPa) to save space. An adjustable stroke is preferred over a fixed SAI cylinder when you need to dial in the exact retract distance on the fly. For applications requiring the rod to hold position without live air pressure, this cylinder is insufficient; consider the SAIL or BSAI locking variants instead. This configuration includes a PT tapered port, carbon steel rod, and -S magnet for sensor tracking.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S FAQ

The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 20 mm, creating a usable 40-60 mm travel window to fine-tune the retract end position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X60-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.