
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X60-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 20 to 60 mm from its 60 mm nominal stroke by dialing back up to 40 mm.
This adjustable design allows you to fine-tune the retract end position during commissioning without adding external stops or swapping the cylinder. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting, and the carbon steel rod with an M10x1.25 thread handles standard loads. It uses PT tapered port threads and operates at speeds between 30 and 800 mm/s.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 20-60 mm window during initial commissioning to perfectly time a pick-and-place motion without machining new hard stops.
Quickly adapt the cylinder's end position on a conveyor sorting line when switching to a different package size, using the rear adjuster to shift the stroke.
Precisely set the travel limit for a delicate pressing or clamping task, trimming the stroke back from 60 mm down to 20 mm to prevent over-travel damage.
The adjustable rear screw is strictly a travel stop, not a locking mechanism. It cannot hold a load without live air pressure. For true load-holding, select an AirTAC SAIL or BSAI cylinder instead.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 60 mm stroke, 40 mm adjustment range, PT port thread, and standard carbon steel rod. Because this is an adjustable-stroke SAIJ variant, the available mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on other types.
Quick checklist
A rear external stopper screw lets you shorten the effective stroke by up to 40 mm. This creates a usable travel window of 20 to 60 mm, allowing you to fine-tune the retract end position without replacing the cylinder.
At the maximum 1.0 MPa pressure, it provides up to 82 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.