
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X60-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back a 60 mm nominal stroke by up to 40 mm. This creates a highly versatile 20 to 60 mm usable travel window, perfect for applications requiring variable end positions without swapping hardware.
As a dimensionally interchangeable ISO 15552 cylinder, it utilizes a PT G1/8 port and variable air cushions at both ends. The integrated magnet (-S) supports position sensing via AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 20 to 60 mm end-stop during product size transitions without adding external shims or swapping cylinders.
Fine-tune the clamping travel on small 32 mm bore actuators to accommodate varying component tolerances at commissioning.
Use the rear mechanical stop to set precise retract positions for delicate testing or sorting operations.
If your setup needs greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The adjustable stroke is chosen over a fixed SAI cylinder when you need on-the-fly commissioning tweaks or frequent product-size changeovers.
For exact ISO 15552 replacement matching, verify the 60 mm nominal stroke, 40 mm adjustment range, PT G1/8 port, and the -S magnet requirement. The SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Remember that the rear adjuster is a travel stop, not a lock; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
At its maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 40 mm, creating a usable travel window of 20 to 60 mm. It functions as a mechanical stop for end-position tuning and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.