
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X60-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 10 to 60 mm, allowing you to dial back the nominal 60 mm stroke by up to 50 mm during machine commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for straightforward detection integration. This model uses a PT tapered port thread (G1/8) and a 12 mm carbon steel rod with an M10x1.25 thread. The rear adjuster acts purely as a mechanical stop to set the retract end-position and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 10 to 60 mm during initial commissioning to perfectly align product stops without machining new spacers.
Quickly adjust the end-stop position on a packaging line when switching to a different carton size, saving changeover time.
Fine-tune the final retract position to compensate for mechanical wear or sensor drift over the machine's lifecycle.
Choose this 32 mm bore model when your application requires fine-tuning the end-of-stroke position without swapping cylinders or adding external stops. Conversely, if you need less force in a tighter footprint, dropping down is an option, though 32 mm is often the baseline for standard ISO 15552 mounting.
Because the nominal stroke is 60 mm, an external guide is not strictly necessary for side-load support, but the 12 mm rod still handles only moderate radial stress. This SAIJ configuration uses PT tapered ports, carbon steel rod, and the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR options. It operates without a magnet, so position sensing via CMSE or DMSE switches is not enabled out of the box.
Quick checklist
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the effective stroke from its 60 mm nominal length down to as little as 10 mm, providing a 50 mm adjustment range without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.