
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X60-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X60-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel rod and a PT tapered port thread. Because this specific SKU carries a 50 mm adjustment code on a 60 mm nominal stroke, you can dial the effective travel back to anywhere in a 10 to 60 mm window. This extreme adjustability is perfect for prototyping or machines where the exact end position is finalized during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides, and the built-in -S magnet is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. Variable air cushions at both ends manage deceleration, while the rear stopper screw sets the final end position without requiring external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X60-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 10-60 mm window during initial startup, eliminating the need to physically swap cylinders for minor position corrections.
Quickly adapt the stroke end position on packaging lines when running different product sizes, using the rear screw to set the new travel limit.
Ideal for test fixtures where the optimal travel distance is unknown, allowing operators to test various end-stops within the 50 mm adjustment range.
Select the SAIJ adjustable-stroke series over a fixed SAI cylinder when you anticipate frequent product changeovers or need to fine-tune the retract distance on the fly. For a direct ISO 15552 dimensional replacement, match the 32 mm bore, 60 mm stroke, 50 mm adjustment, PT port thread, and -S magnet.
Remember that the rear adjuster is a travel stop, not a locking mechanism. This cylinder cannot hold a load or maintain its position without continuous live air pressure. If your setup requires true load-holding in the event of air loss, consider an AirTAC SAIL pneumatic lock cylinder or an external rod lock instead.
Quick checklist
At a maximum 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 60 mm nominal stroke by up to 50 mm. This creates a usable travel window of 10 to 60 mm, which can be fine-tuned during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.