
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 590-600 mm usable travel window, allowing you to trim the effective stroke by up to 10 mm during commissioning without adding external stops.
This variant uses a standard carbon steel rod with a PT tapered port thread (G1/8) and a 12 mm rod thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is not magnet-equipped. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 590 to 600 mm retract position during machine commissioning without swapping cylinders or adding external stopper blocks.
Quickly adjust the stroke by up to 10 mm to accommodate slight variations in product sizes on a modular assembly line.
Choose this 32 mm bore when you need precise end-position tuning within a 590-600 mm travel window. The rear adjuster acts solely as a mechanical stop for deceleration and end-positioning; it is not a lock. The SAIJ does not hold loads without live air pressure, so for fail-safe load holding, consider the SAIL or BSAI series. Because the 600 mm stroke is long relative to the 12 mm rod diameter, an external guide is recommended to prevent excessive side-loading.
To match this ISO 15552 interchangeable cylinder for a replacement, verify the 32 mm bore, 600 mm stroke, 10 mm adjustment range, PT G1/8 port, and the absence of a magnet (-S). Fixed-stroke applications that do not require end-tuning should use the standard SAI series instead.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 10 mm. This creates a 590-600 mm usable travel window, allowing fine-tuning of the end position at commissioning without changing the cylinder.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.