
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 600 mm nominal stroke that can be dialed back by up to 100 mm, yielding a precise 500-600 mm usable travel window for fine-tuning end positions during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though a magnet is not included on this standard configuration. The PT tapered port thread and carbon steel rod are standard, and the rear stopper screw allows you to trim the retract position without adding external stops or swapping the cylinder entirely.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 500-600 mm window during product size changes without swapping hardware.
Use the rear adjuster to set precise end-of-stroke positions for delicate picking and placing operations.
Fine-tune the travel limit on-site to perfect timing and avoid mechanical crashes during initial machine setup.
The 100 mm adjustment range is highly beneficial for machine setups requiring variable end-stops or frequent product-size changeovers, preventing the need to physically replace a fixed-stroke SAI cylinder. Because the stroke is 600 mm, the 12 mm carbon steel rod is susceptible to side-loading; an external guide mechanism is strongly recommended to prevent rod bending and premature seal wear.
To match this exact configuration for an ISO 15552 interchange, specify a 32 mm bore, 600 mm stroke, 100 mm adjustment range, PT port thread, and standard carbon steel rod without a magnet. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for load-holding requirements, consider an AirTAC SAIL or BSAI cylinder. The compatible mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating a usable travel window of 500 to 600 mm. This stopper only limits the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.