
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 590 to 600 mm usable travel window, allowing you to dial in the exact retract end-position during commissioning without adding external stops.
This variant includes a standard magnet for position sensing with CMSE reed and DMSE electronic sensors. It features a 12 mm carbon steel rod with an M10x1.25 thread, G1/8 ports, and variable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 590 to 600 mm retract position during machine setup to perfect part ejection without machining external spacers.
Quickly adjust the retract end-position by up to 10 mm when switching between product variants on a packaging line.
Use the integrated magnet with DMSE electronic sensors to confirm travel across the long 600 mm stroke, ensuring precise sequencing.
Choose this 32 mm bore adjustable cylinder when you need precise end-stop tuning on a long 600 mm stroke. If your application requires higher force, stepping up to a 40 mm bore increases push force to 879 N at 0.7 MPa. The rear adjuster on this SAIJ model acts purely as a travel stop for fine-tuning; it does not hold the load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI cylinder.
Because the 600 mm stroke is substantial for a 32 mm bore, the 12 mm rod can experience deflection under heavy side loads. Always guide the load externally to prevent rod bending. This SKU is dimensionally interchangeable with ISO 15552 cylinders and uses a PT tapered port thread.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm, creating a 590 to 600 mm travel window. It acts as a mechanical stop to fine-tune the retract position and does not lock the load without air pressure.
At 0.7 MPa, the push force increases to 563 N, and it reaches 724 N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.