verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke600 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$105.58 $113.08Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20

The AirTAC SAIJ32X600-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 580 to 600 mm, allowing you to dial back the nominal 600 mm stroke by up to 20 mm during commissioning.

This model utilizes a 12 mm carbon steel rod with an M10x1.25 thread, paired with PT tapered port threading for reliable pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, enabling the direct mounting of CMSE reed or DMSE electronic sensors if needed later. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X600-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke600 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20 Is Used

tune

Machine Setup Tuning

Dial in the exact 580 to 600 mm retract position during initial machine commissioning without machining new hard stops.

settings_input_component

Product Changeover

Quickly adapt the end-stop distance for slightly different product sizes on the same line using the rear adjustment screw.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20 the Right Cylinder?

The adjustable 580-600 mm travel window is ideal for product changeovers, letting you fine-tune the retract end-stop without physically swapping the cylinder or adding external stops. At 600 mm of stroke, the 12 mm rod is prone to side-loading; an external guide is recommended to prevent binding.

Because the rear adjuster acts only as a travel stop and the air cushions manage deceleration, this cylinder will not hold a load without live air pressure. For drop-down protection or dead-stop holding, consider an AirTAC SAIL (pneumatic lock) or BSAI (clamp-lock) cylinder. To replace this unit, match the 32 mm bore, 600 mm stroke, 20 mm adjustment, PT port, and the chosen mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20 FAQ

At 0.7 MPa, the push force increases to 563 N.

A rear stopper screw lets you shorten the 600 mm nominal stroke by up to 20 mm, creating a 580 to 600 mm usable travel window. It functions as an end-stop, not a load lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X600-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.