verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke600 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$108.37 $115.87Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S

The AirTAC SAIJ32X600-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet enables precise position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors housed in the dual-side barrel grooves.

With a 600mm nominal stroke and a 20mm adjustment range, this model provides a usable travel window of 580-600mm. This built-in rear stopper allows you to fine-tune the end position at commissioning without adding external stops. Note that the adjuster acts only as a travel stop and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke600 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S Is Used

settings_input_component

Variable End-Stop Tuning

Dial in the exact retract position within a 580-600mm window during machine commissioning without machining new hard stops.

conveyor_belt

Product Size Changeover

Quickly adjust the stroke by up to 20mm on a packaging line to accommodate varying box lengths on the fly.

precision_manufacturing

Long-Stroke Positioning

Use the 600mm travel to move components between stations, relying on the rear stopper for final position trimming.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S the Right Cylinder?

If your application requires less force, stepping down is not an option below 32mm in this series, but stepping up to a 40mm bore yields 628N. Compared to a fixed SAI cylinder, this adjustable version prevents the need to swap hardware when dialing in a precise 580-600mm stroke. To replace an ISO 15552 cylinder, match the 32mm bore, 600mm stroke, PT port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Because the stroke is 600mm, the 12mm carbon steel rod needs external guidance to prevent excessive side-loading and buckling.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S FAQ

The rear adjuster screw acts as a mechanical stop, allowing you to trim the effective stroke back by up to 20mm. This creates a usable travel window of 580-600mm, enabling fine-tuning of the end position without changing the cylinder.

At 0.7 MPa, the push force increases to 563N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X600-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.