
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 560 to 600 mm usable travel window, allowing you to trim up to 40 mm off the nominal stroke during commissioning.
This extruded aluminum profile cylinder includes variable air cushions at both ends and dual sensor grooves. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position, meaning it cannot hold a load without continuous live air pressure. For load-holding requirements, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 560-600 mm travel window during product size transitions without swapping out the entire actuator assembly.
Fine-tune the retract position on long-stroke machinery to perfect seating tolerances at initial commissioning.
Adjust the stroke on a sorting diverter to handle varying package lengths on the fly without adding external stops.
Choose this 32 mm bore when an application requires precise end-position tuning over a long 600 mm travel without machining custom external stops. Because the stroke is 600 mm, the unsupported piston rod is susceptible to deflection; always use an external guide to prevent binding and premature seal wear.
The adjustable stroke is ideal for machine changeovers where product sizes vary slightly. This model features a PT tapered port thread, operates at 30-800 mm/s, and uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). It is dimensionally interchangeable per ISO 15552, though it omits FB, CA, CB, and CR mounts. Without a magnet (-S), it cannot host CMSE or DMSE sensors.
Quick checklist
At a maximum 1.0 MPa, it achieves 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 600 mm down to 560 mm. It sets the travel end but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.