
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 600mm nominal stroke that can be fine-tuned backward by up to 40mm, creating a precise 560-600mm usable travel window for product changeovers.
Equipped with a magnet for position sensing, this unit supports AirTAC CMSE reed and DMSE electronic sensors. It features a 12mm carbon steel rod with an M10x1.25 thread, offering a robust interface for attachments while keeping the overall payload manageable. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop position when switching a packaging line to a new carton length, using the 40mm adjustment window to avoid re-engineering fixed stops.
Precisely set the stroke limit on a sorting diverter arm to accommodate varying product widths without replacing the entire cylinder assembly.
Choose this adjustable-stroke model when a machine requires frequent end-position tweaking at commissioning or during product size changes, avoiding the need to swap out a fixed-stroke SAI cylinder or add external mechanical stops. If your application needs greater thrust, stepping up to the 40mm bore yields 628N at 0.5MPa. Because the nominal stroke is 600mm, the 12mm rod is highly susceptible to side-loading and sagging; an external guide rail must be used to prevent binding and premature seal wear.
To match this ISO 15552 interchangeable cylinder, specify a 32mm bore, 600mm stroke, 40mm adjustment range, PT tapered port threads, and the -S magnet option. Remember that the rear adjuster acts only as a travel stop and the air cushions provide deceleration; neither will hold a load without live air pressure. For true load-holding, use an external pilot-operated check valve or explore the SAIL or BSAI series.
Quick checklist
If you increase the pressure to 0.7MPa, the push force rises to 563N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 600mm stroke by up to 40mm, providing a usable travel window of 560 to 600mm. It sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.