
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 550 to 600 mm, letting you fine-tune the retract end-position without adding external stops.
This unit includes a magnet for CMSE reed and DMSE electronic sensors, which seat neatly into the dual-side sensor grooves on the extruded aluminum barrel. It uses a PT tapered G1/8 port and a 12 mm carbon steel rod. Because the 600 mm stroke is quite long for a 32 mm bore, the 12 mm rod needs external guidance to prevent side-load damage. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 550-600 mm retract position precisely during machine setup to accommodate different part lengths without swapping physical stop blocks.
Adjust the stroke on the fly during packaging line changeovers, using the 50 mm trim range to handle varying box sizes quickly.
Leverage the integrated magnet for DMSE electronic sensors to confirm end-position before triggering the next stage of a lightweight assembly process.
If your setup demands greater thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The 50 mm adjustment range is ideal for product changeovers, allowing you to dial in the exact end-stop during commissioning rather than machining new hard stops. For an ISO 15552 replacement, match the 32 mm bore, 600 mm stroke, PT G1/8 port, and the -S magnet requirement. Remember that the rear adjuster is a stop, not a lock; if you need fail-safe load holding without air, select the SAIL or BSAI series instead. Given the 600 mm travel, an external guide is strongly recommended to manage side loads on the 12 mm rod.
Quick checklist
It can deliver a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the nominal 600 mm stroke by up to 50 mm, creating a 550-600 mm usable travel window. This allows fine-tuning of the end-position at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.