
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 600 mm nominal stroke that can be dialed back by up to 75 mm, yielding a 525-600 mm usable travel window for precise end-position tuning during machine commissioning.
This variant features a standard carbon steel piston rod and PT tapered port threads (G1/8). The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. The rear adjustment screw functions strictly as a mechanical stop to set the retract position, meaning it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 525-600 mm window during machine setup, replacing the need for external stopper blocks.
Quickly modify the cylinder's effective stroke on automated lines to accommodate varying product lengths without changing the actuator.
If your application requires higher thrust, stepping up to the 40 mm bore yields 628 N. Because the 600 mm stroke is quite long for a 12 mm rod, an external guide is strongly recommended to prevent excessive side-loading and premature seal wear.
When matching an ISO 15552 replacement, verify the 32 mm bore, 600 mm stroke, 75 mm adjustment range, PT port threads, and the specific mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2). For load-holding requirements without live air, note that the adjuster is only a stop; consider an AirTAC SAIL or BSAI locking cylinder instead.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 75 mm, creating a 525-600 mm travel window. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.