
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X600-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X600-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in the retract end-position during commissioning without swapping out the cylinder or adding external stops.
This variant includes a magnet for position sensing and uses a standard carbon steel piston rod with a PT tapered port thread. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. Because the 600mm stroke is relatively long for a 32mm bore, the 12mm rod should be guided externally to prevent excessive side-loading and premature seal wear.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X600-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-position by up to 75mm when switching between product sizes on a packaging line, avoiding mechanical teardown.
Fine-tune the 525-600mm travel window during machine setup to perfectly time the stroke without fabricating custom external spacers.
Provide adjustable physical stops for diverter gates or push-off mechanisms that require slight position tweaks based on payload dimensions.
The adjustable stroke is ideal for machines that undergo frequent product changeovers, replacing the need for fixed-stroke SAI cylinders when exact end-positions fluctuate. When matching your ISO 15552 footprint, confirm a 600mm stroke, 75mm adjustment, PT port, and the -S magnet option.
Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead. The SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR options.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw lets you shorten the 600mm nominal stroke by up to 75mm, yielding a usable travel range of 525-600mm. It acts purely as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.