
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X65-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X65-20 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It features a 32mm bore, a 12mm carbon steel rod, and a PT G1/8 port. The built-in adjuster allows you to fine-tune the effective travel down from the 65mm nominal stroke, creating a 45-65mm usable window to perfectly dial in the retract end position during machine commissioning.
It includes variable air cushions at both ends to decelerate the moving load. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider an external pilot-operated check valve or the SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X65-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the retract end-stop for different product sizes on a packaging line without replacing the cylinder or re-engineering the fixture.
Dial in the exact 45-65mm travel window during initial setup to compensate for mechanical tolerances and achieve precise sensor triggering.
Provide an adjustable physical stop for lightweight materials on a conveyor, tuning the protrusion distance on the fly without live air locking.
Choose this 32mm bore adjustable-stroke model when your assembly requires precise end-position tuning without swapping out physical cylinders or adding external stop blocks. Conversely, if you need higher force, the 50mm bore provides 982N.
This SAIJ32X65-20 configuration features a PT tapered port thread, a carbon steel rod, and no sensor magnet. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR foot and pivot options. Because the stroke is under 300mm, side-load concerns from an unsupported rod are minimized, though external guidance is still recommended for heavy lateral loads.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the 65mm nominal stroke by up to 20mm, resulting in a 45-65mm adjustable travel window. It acts as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.