
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X65-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X65-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 65 mm stroke that can be dialed back by up to 20 mm, creating a precise 45-65 mm usable travel window for commissioning without external stops.
This variant features a carbon steel piston rod and a PT tapered port thread. The -S magnet option enables position sensing with AirTAC CMSE reed and DMSE electronic switches fitted into the dual-side sensor grooves. It supports a 30-800 mm/s speed range and uses adjustable air cushions at both ends to decelerate the load.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X65-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 45-65 mm end-stop during product size transitions without swapping cylinders or adding external mechanical stops.
Fine-tune the retract distance on small fixtures to perfect part seating during initial commissioning.
Leverage the -S magnet with DMSE electronic switches to confirm the adjusted end-of-stroke position in automated workflows.
Choose this 32 mm bore adjustable cylinder when you need fine end-position tuning during machine setup or product changeover, avoiding the need to swap physical components. For holding a load securely without continuous air pressure, note that this rear adjuster acts only as a travel stop; you would need an external pilot-operated check valve or a related SAIL pneumatic lock cylinder. To match this ISO 15552 interchangeable unit, specify the 32 mm bore, 65 mm stroke, 20 mm adjustment, PT port, and the -S magnet.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjuster screw lets you shorten the 65 mm nominal stroke by up to 20 mm, providing a usable travel window of 45-65 mm to fine-tune the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.