
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X65-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X65-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position at commissioning. With a nominal 65 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 35-65 mm without requiring external stops.
This model includes a magnetic piston for position detection, working seamlessly with AirTAC CMSE reed and DMSE electronic sensors housed in the dual-side sensor grooves. It uses a G1/8 PT port and offers variable air cushions at both ends to manage end-of-stroke deceleration. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X65-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 35-65 mm travel window during machine changeover to accommodate varying product lengths without replacing the cylinder.
Fine-tune the retract end-stop during commissioning to perfect seating forces without adding bulky external mechanical stops.
Leverage the magnetic piston with DMSE electronic sensors to confirm the adjusted end position in automated assembly lines.
An adjustable stroke is preferred over a fixed SAI cylinder when you need machine setup flexibility or product changeover without physically swapping components. For load-holding requirements without live air pressure, consider the SAIL or BSAI series, as the SAIJ rear adjuster is a stop, not a lock. To match this ISO 15552 footprint, specify the 32 mm bore, 65 mm stroke, 30 mm adjustment, G1/8 PT port, and -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjusting screw allows you to shorten the nominal 65 mm stroke by up to 30 mm, creating a usable travel window of 35 to 65 mm. This stopper only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.