
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X65-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X65-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15 to 65 mm, allowing you to dial back the nominal 65 mm stroke by up to 50 mm during machine commissioning.
Equipped with a -S magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors mounted in the dual-side barrel grooves. The carbon steel rod with an M10x1.25 thread handles basic loads, while the PT tapered port ensures a tight pneumatic seal.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X65-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end-position up to 50 mm during commissioning to hit exact product dimensions without swapping cylinders.
Quickly adapt the 15-65 mm travel window for different product sizes running on the same conveyor or assembly line.
The rear adjuster acts purely as a travel stop and does not hold the load without live air—use SAIL or BSAI cylinders for true locking.
This SAIJ configuration is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR. It features a PT port thread and operates smoothly at speeds of 30-800 mm/s.
Quick checklist
The rear adjusting screw lets you mechanically shorten the effective stroke by up to 50 mm, creating a usable travel window of 15 to 65 mm. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.