
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X650-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 550 to 650 mm. Its extruded aluminum barrel features sensor grooves on both sides, accepting CMSE reed or DMSE electronic solid-state switches.
The integrated rear stopper allows you to dial back the stroke by up to 100 mm during commissioning without adding external stops. Because the adjuster acts purely as a travel stop and not a lock, live air pressure is required to maintain the load. For position holding without air, an external rod lock or SAIL cylinder is necessary.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 550-650 mm travel window during format changes on packaging lines without physically replacing the cylinder.
Leverage the -S magnet with DMSE solid-state sensors to confirm exact end positions after trimming the rear stopper.
Fine-tune the retraction point at commissioning to prevent mechanical crashes, using the rear screw instead of external shims.
Choose this 32 mm bore when an application requires precise end-position tuning over a long 650 mm travel, stepping up from smaller bores if 402 N at 0.5 MPa is insufficient. The adjustable stroke is ideal for product changeovers on a line, letting you shift the end stop dynamically rather than swapping a fixed-stroke SAI cylinder. To match this ISO 15552 footprint, specify the 32 mm bore, 650 mm stroke, PT tapered port, and the -S magnet option.
With a 650 mm stroke, the 12 mm carbon steel rod and M10x1.25 thread are susceptible to side loads. Always use an external guide to prevent binding. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw lets you shorten the effective stroke by up to 100 mm, creating a 550 to 650 mm travel window. It acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.