verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke650 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$115.14 $122.64Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20

The AirTAC SAIJ32X650-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 630 to 650 mm, allowing you to dial back the nominal stroke by up to 20 mm during commissioning.

This model uses a 12 mm carbon steel rod with an M10x1.25 thread, sized to handle moderate side loads, though a 650 mm stroke still demands an external guide to prevent rod deflection. It integrates variable air cushions at both ends and offers a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting heavier FB and CA brackets.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X650-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20 Is Used

tune

Machine Setup & Changeover

Fine-tune the 630-650 mm retract position during machine commissioning or product size changes without machining new stopper blocks.

precision_manufacturing

Variable End-Stop Positioning

Dial in the exact end-of-stroke point on automated assembly lines where multiple parts require slightly different travel distances.

conveyor_belt

Extended-Stroke Diverting

Handle long-travel diverting or pushing tasks on a conveyor, using the 12 mm rod and adjustable stop to manage product flow.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20 the Right Cylinder?

The adjustable stroke is ideal for product changeovers or fine-tuning the retract end-position without swapping the cylinder or adding external stops.

For a 650 mm stroke, an external guide rail is strongly recommended to support the load and prevent rod bending. Remember that the rear adjuster acts only as a travel stop and the air cushions provide deceleration; neither holds the load without live air. For fail-safe load holding, consider an AirTAC SAIL or BSAI series cylinder. This unit is dimensionally interchangeable per ISO 15552 with a PT tapered port.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20 FAQ

The rear adjuster screw lets you shorten the effective stroke by up to 20 mm, creating a usable travel window of 630 to 650 mm. It acts as a mechanical stop to set the end position precisely without needing external shims.

At its maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X650-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.