
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X650-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the retract position by up to 40 mm. This yields a usable travel window of 610 to 650 mm, giving you precise end-position tuning during commissioning without adding external stops.
Featuring a 12 mm carbon steel rod and an M10x1.25 thread, this unit uses a PT tapered port and operates at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, though this specific SKU is configured without a magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 610-650 mm retract position during product size changes without swapping the cylinder or re-machining hard stops.
Fine-tune the stroke end on packaging lines to accommodate different carton lengths on the fly using the 40 mm rear adjuster.
Trim back the full 650 mm stroke by up to 40 mm during setup to perfectly time the machine sequence without external hardware.
If your application requires less force, stepping down is not an option within the SAIJ range as 32 mm is the smallest bore. The rear adjuster screw acts strictly as a travel stop, not a load lock; the cylinder will not hold its position without live air pressure. For true fail-safe load holding, consider the SAIL or BSAI series.
Because the 650 mm stroke is relatively long for a 32 mm bore, the unsupported rod length is substantial. Despite the 12 mm rod providing decent rigidity, you must use an external guide to prevent rod sag and binding under heavy side loads. This cylinder is dimensionally interchangeable per ISO 15552 mounting interfaces, configured with PT ports and no sensor magnet.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 650 mm down to 610 mm. It is a travel stop, not a lock, so the cylinder requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.