
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X650-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X650-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from 650 mm to a 600-650 mm window.
This model uses a PT tapered G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. It includes variable air cushions at both ends and features dual-side sensor grooves, though it is configured without a magnet for position sensing.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X650-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 600-650 mm travel window during product size transitions to set new end stops quickly without replacing the cylinder.
Fine-tune the retract end position during commissioning to compensate for mechanical tolerances in your fixture layout.
Provide adjustable push-off strokes on assembly lines where part ejection distances vary slightly between stations.
The adjustable rear stopper is ideal for machine setup and product changeover, letting you dial in the exact end-of-stroke position without adding external stops or buying a fixed-stroke SAI cylinder.
Because the stroke is 650 mm, the 12 mm rod will experience higher side-loading leverage; an external guide is recommended to prevent rod bending. This SAIJ cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective travel from the nominal 650 mm down by up to 50 mm, giving a usable travel window of 600-650 mm. It is a travel stop, not a lock, and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.